The SX1272 LoRa module main advantage is the reach increasing but also the cost saving respect other similar modules like XBee 868 or XBee 900. The SX1272 LoRa module uses the SPI bus. The SPI port allows more speed communication and frees up the UART for other purposes like debugging or to connect communication modules.
It comes with a 868 MHz antenna to be used in this frequency.
You can see all the LoRa modules for Waspmote here.
Waspmote is an open source wireless sensor platform specially focused on the implementation of low consumption modes which allows the sensor nodes ("motes") to be completely autonomous, that is battery powered. Lifetime of Waspmote sensor nodes may go from 1 to 5 years depending on the duty cycle and the radio used.
Waspmote is based on a modular architecture. The idea is to integrate only the modules needed in each device optimizing costs. For this reason all the modules (radios, sensor boards, etc) plug in Waspmote through sockets.
You will need batteries to use Waspmote as an autonomous device.LoRa VS LoRaWAN
Note: This product includes the new generation Waspmote v1.5. If you have previous versions of sensor boards contact our Sales Department for Waspmote 1.2 units. To know more about the Waspmote versions take a look to this document.
LoRa Networking Guide
Waspmote Quick Tutorial
Waspmote Technical Guides
Sensor Boards Technical Guides
50 Applications with Waspmote
FAQ: Waspmote Vs. Arduino
If you are interested in Internet of Things (IoT) or M2M projects check our open source sensor platform Waspmote which counts with more than 100 sensors available to use 'off the shelf', a complete API with hundreds of ready to use codes and a low consumption mode of just 0.7µA to ensure years of battery life.
Know more at:
Get the Starter Kits at: