Description
European/Brazilian version only available on demand for quantities over 100 units. Please contact us if you want to buy this version. Alternatively, you can take a look to our 3G solutions for Arduino,
Korean and Australian versions don't come with GPS connectivity.
The new 4G + GPS Mobile Tracking Kit enables the connectivity to high speed LTE, HSPA+, WCDMA cellular networks in order to make possible the creation of the next level of worldwide interactivity projects inside the new "Internet of Things" era. The module comes with 3 waterproof IP67 SMA pigtails perfect for ourtdoor projects.
This module includes:
- 1x 4G Shield (LE910 Chipset)
- 2x 4G antennas
- 1x GPS antenna (Excluded on Korean and Australian versions)
- 3x Waterproof IP67 SMA pigtails uFL-SMAH
- 1x Starter Kit
- 1x Starter Kit Box
- 1x "Starter Kit" Sticker
- 1x Arduino Jumper Cables
- 1x Breadboard clear
- 20x Resistor 1/4W 5% 220 ohm
- 10x Resistor 1/4W 5% 100 ohm
- 10x Resistor 1/4W 5% 10 K
- 10x Resistor 1/4W 5% 4,7 K
- 10x Resistor 1/4W 5% 1 M
- 2x Potentiometer 10K
- 4x Push Button 12x12 B3F-4150
- 1x Temperature Sensor (MCP9700)
- 10x 5mm Red Led
- 10x 5mm Green Led
- 1x 9v To Barrel Jack Adapter
- 1x LDR Sensor
- 4x Sugus
- 1x Piezo Speaker (ref.10066)
- 1x 5mm Triple Output Led RGB (Common Anode)
- 1x 9G Micro Servo
- 1x Hobby Motor
- 1x LCD 16*2 Characters - Green Yellow back light
- 1x Transistor BC547CG
The 4G module is managed by UART. The main features of the modules are listed below:
- Output power
- Class 4 (2 W, 33 dBm) @ GSM 900
- Class 1 (1 W, 30 dBm) @ GSM 1800
- Class E2 (0.5 W, 27 dBm) @ EDGE 900
- Class E2 (0.4 W, 26 dBm) @ EDGE 1800
- Class 3 (0.25 W, 24 dBm) @ UMTS
- Class 3 (0.2 W, 23 dBm) @ LTE
- Data Transmission:
- LTE:
- Downlink up to 100 Mbps
- Uplink up 50 Mbps
- HSPA+:
- Downlink up to 42.0Mbps
- Uplink up to 5.76Mbps
- UMTS:
- Uplink/Downlink up to 384 kbps
- Protocols:
- TCP/UDP
- HTTP
- FTP
Coming soon:
- LE910-JN V2 / LE910-JK V2 (Japan): NTT DoCoMo, KDDi -> [Available in 2017] Contact us for more info.
Related Tutorials
The new 4G shield for Arduino and Raspberry Pi enables the connectivity to high speed LTE, HSPA+, WCDMA cellular networks in order to make possible the creation of the next level of worldwide interactivity projects inside the new "Internet of Things" era.
The new communication module is specially oriented to work with Internet servers implementing internally several application layer protocols which make easier to send the information to the cloud. We can make HTTP navigation, downloading and uploading content to a web server. We can also set secure connections using SSL Certificates and setting TCP/IP private sockets. In the same way FTP protocol is also available which is really useful when your application requires handling files.
If you are interested in Internet of Things (IoT) or M2M projects check our open source sensor platform Waspmote which counts with more than 100 sensors available to use 'off the shelf', a complete API with hundreds of ready to use codes and a low consumption mode of just 0.7µA to ensure years of battery life.
Know more at:
Get the Starter Kits at:
